Advantech VEGA-1100, User Manual

Page: 24 / 30

VEGA-1100 User Manual 16
2. Display Wall
Users can click on the device ID, then set the output video resolution and dis -
play wall split method. Horizontal Cut and Vertical Cut are up to 8x8 displays,
and the range is selected from the number. You can also define wall dimensions
by adjusting the orange frame on the left, or entering parameters. After complet -
ing the settings, please click “ Preview ” or “ Apply ”.
3. HDMI Audio
First, select the device ID to set HDMI audio modes, including audio from HDMI
and I2S. Then click “
Start
” or “
Stop
” to start the audio or stop the audio. After
completing the audio mode settings, drag the input device to output device to do
input/output mapping. Users can also click “
Leave
” to disconnect the input and
output of the device.
* Please select the device ID and click “
Start
” in Analog Audio page, if you want
to choose I2S audio subscription or I2S audio local loop out modes.
4. Analog Audio
First, select the device ID to set Analog Audio output modes, including audio
from HDMI and I2S. Then click “ Start ” or “ Stop ” to start the audio or stop the
audio. After completing the audio mode settings, drag the input device to output
device to do input/output mapping. Users can also click “ Leave ” to disconnect
the input and output of the device.