UNO-2184G/2174G/2174GL User Manual
30
A.11
Clear CMOS (JP1)
This jumper is used to erase CMOS data and reset system BIOS information.
Follow the procedures below to clear the CMOS.
1.
Turn off the system.
2.
Close jumper JP2 (2-3) to clear CMOS
3.
Remove jumper JP2 (1-2)
4.
Turn on the system. The CMOS is now cleared.
5.
Turn on the system. The BIOS is reset to its default setting.
A.12
System Power AT or ATX Selection (JP3)
UNO-2184G/2174G/2174GL can set AT or ATX power mode in the BIOS or hard-
ware jumper settings.
Table A.12: JP2 Clear CMOS
Configuration Function
Clear CMOS
Normal ( Default)
1
2
3
1
2
3
Table A.13: AT/ATX Selection
Configuration Function
AT mode
ATX mode (default)
1
2
3
1
2
3
