11
UNO-137 User Manual
C
ha
pte
r 2
H
ard
w
are
F
un
ctio
na
lity
2.2.1
Power Connector
UNO-137 comes with a Phoenix connector that carries 10 - 36 V
DC
external power
input, and features reversed wiring protection. Therefore, the system will not accrue
damage from reversed polarity of ground lines and power lines. (Please refer to User
Manual - Appendix A.1 for pin assignments)
2.2.2
LAN: Ethernet Connector
UNO-137 is equipped with two Gigabit LAN controllers. An Intel® i210 Ethernet con
-
troller that complies with IEEE 802.3u 10/100/1000 Base-T is used as the controller
chip. The Ethernet port is a standard RJ-45 jack. Additionally, LED indicators are pro
-
vided on the front of the device to indicate the system’s Link (off/green/orange) and
Active (green) status. (Please refer to User Manual- Appendix A.2 for pin assign
-
ments.)
2.2.3
USB Connector
UNO-137 features 4x USB ports that comply with USB EHCI, 3 for Rev. 3.0, 1 for
Rev. 2.0 specifications. The USB connectors support plug-and-play and hot-swap
-
ping functionality for external devices. Additionally, this can be enabled/disabled in
the BIOS menu. (Please refer to User Manual- Appendix A.3 for pin assignments.)
2.2.4
Display Connector
The UNO-137 provides 2x DP 1.2 connector for a high resolution interface up to 4096
x 2306 @ 60Hz, It also supports DP++ that can be compatible with passive adapter.
(Please refer to User Manual- Appendix A.4 for pin assignments.)