25
Chapter 3
*actually you can set any IP address other than 10.0.0.1 and 10.0.0.2 from
10.0.0.3 to 10.0.0.255 . If you connected you computer and UNO-1019 to
a router, don't set your computer IP address the same as the Router's.
Connect UNO-1019 with your computer by using a
crossover
Ethernet
cable. Or connect both UNO-1019 and your computer into a hub.
After UNO-1019 boot up, it will broadcast it's IP to the network. uScope
Remote Display tool running on you computer will detect the UDP mes-
sage that send out by UNO-1019 and show the device name and IP in it's
device list. You can select and connect to the device (UNO-1019) in the
list as you want.
Double Click the uScope icon in configuration computer:
Click the “Show List” bottom :