Advantech TREK-734, User Manual, Page: 28 / 56

TREK-734 User Manual 34
4.2.2 Mode Control
In this page, you can toggle “AT Mode” and “Keep Alive Mode”.
Press “Save Default” to set current settings as default value of VPM controller.
Press “Load Default” to load the default values.
4.2.3 Low Voltage Protection
You can enable/disable and set the pre-boot/post-boot low voltage protection threshold in
this page.
Press “Get” to get the current threshold value and Press “Set” to set the value.
Press “Save Default” to set current value as default value of VPM controller.
Press “Load Default” to load the stored default values.