Advantech SMB-2501, User Manual

Page: 30 / 91

SMB-2501 User’s Manual 29
Press the lever down. The plate will slide forward. You will
feel some resistance as the pressure starts to secure the CPU
in the socket. This is normal and will not damage the CPU.
When the CPU is installed, the lever should snap into place
at the side of the socket.
Note: To remove a CPU, pull the lever out to the side a
little and raise it as far as it will go. Lift out the CPU.
Paint the heat-spread glue on the CPU evenly.
(It is recommended, but some CPU cooler fan comes with a
thermal pad.