SmartMotion ST355
6.2
Start
The router is put into operation when the power supply is connected to this router. By
default, the router will automatically start to log on to the default APN. DHCP server will start
to assign addresses for devices on the Ethernet port ETH0. Router’s behavior can be changed
via the web interface. This is described in detail in the
Configuration manual for SmartMotion
routers
.
6.3
Configuration
If no SIM card is inserted in the router, it is not possible to operate. Inserted SIM card
must have activated data transmission.
6.3.1
Configuration over web browser
For status monitoring, configuration and administration of the router is available a web
interface which can be accessed by entering the IP address of the router into the web browser.
The default IP address of the router is 192.168.1.1.
Attention, it is necessary to use HTTPS
protocol for secure communication over a network!
Figure 27: Entering the IP address of the router
Configuration may be performed only by the user "root". The default password is printed
on the router’s label.
Change the default password as soon as possible!
Figure 28: Entering login information
1
If the router’s label does not contain a unique password, use the password "root".
30
