5
Figure 1-3 Rear Panel of the SG-1103
1.
LAN1, LAN2, LAN3 ports
The LAN port connectors are RJ-45 and support 10/100BaseTX
Ethernet (10 Mbps/100 Mbps on a twisted pair cable). These ports
are used for connecting LAN, WAN, DMZ.
2.
COM ports
The console port supports a data terminal equipment (DTE)
interface (cable included) with 8 data bits, no parity, and 1 stop bit,
the default speed is 38400 bps.
3.
VGA port (SG-1103 only)
This port is a standard VGA interface. Resolution supported is
1024 x 768. Shared memory supports up to 64 MB.
4.
PS/2 Keyboard & Mouse port (SG-1103 only)
The PS/2 keyboard/mouse port is for system installation,
configuration, and diagnostics.
Summary of Contents for SG-1003
