Advantech RSB-4411, User Manual

Page: 62 / 83

51 RSB-4411 User Manual
Chapter 3
S
oftware
Functionality
3.3.2.3 Pre-built image
Perform the following command to build one boot-up SD card
$ gunzip ‐ c ${PREBUILT_IMAGE} | dd of=${SD_DEVICE} bs=1M
3.3.3 Build Instructions
To create one new build environment ,perform following commands in terminal con-
sole:
$ cd ${BSP_HOME}
$ MACHINE=${MC} source fsl ‐ setup ‐ release.sh ‐ b ${BDIR} ‐ e x11
You need to read and accept the EULA. Press "Y"
To continue an exist build environment, perform following commands in terminal con-
sole:
$ cd ${BSP_HOME}
$ source setup ‐ environment ${BDIR}
3.3.3.1 To build sdcard image
To create/continue a build environment, perform following command in terminal con-
sole:
$ bitbake fsl ‐ image ‐ qt5
The file, fsl-image-qt5-${MC}.sdcard, will be located in directory, ./tmp/deploy/
images/${MC}, while building process finished successfully.
3.3.3.2 To build toolchain installer
To create/continue a build environment, perform following command in terminal con-
sole:
$ bitbake meta ‐ toolchain ‐ qt5
The below installer will be located in the directory "./tmp/deploy/sdk".
fsl ‐ imx ‐ x11 ‐ glibc ‐ x86_64 ‐ meta ‐ toolchain ‐ qt5 ‐ cortexa9hf ‐ vfp ‐ neon ‐
toolchain ‐ ${KERNEL} ‐ 1.1.0.sh
3.3.3.3 To build u-boot
To create/continue a build environment, perform following commands in terminal con-
sole:
$ bitbake u ‐ boot ‐ imx
The two files, u-boot_crc.bin & u-boot_crc.bin.crc, will be located in directory, ./tmp/
deploy/images/${MC}.
3.3.3.4 To build Linux kernel
To create/continue a build environment, perform following commands in terminal con-
sole and do menuconfig:
$ bitbake linux ‐ imx ‐ c menuconfig
to start build
$ bitbake linux ‐ imx ‐ c compile ‐ f
$ bitbake linux ‐ imx ‐ c compile_kernelmodules ‐ f
$ bitbake linux ‐ imx ‐ c deploy
The two files, zImage & zImage-${IMX6PROC}-${BOARD}-${BOARD_REV}.dtb, will
be located in directory, ./tmp/deploy/images/${MC}.