Starting your System
Before starting your system, plug in the power cord and make sure the video and input device
connectors are plugged in. Release the keyboard latches and lay it flat on your work area.
Systems with ATX Power Supply
If you have an ATX power supply, power up
your system by pressing the ATX power
switc h push button on the front panel of your
chassis.
Systems with AT Power Supply
If your system is passive backplane-based
using an AT power supply, the front push
button power switch is disabled. Power up
your system by pressing the power switch on
the power supply.
OSD Controls
The LCD controller includes an integrated RAM-based OSD controller. Through four front
panel controls you can view adjustable features of the LCD through the On-Screen Display.
Follow these steps to activ ate the on-screen display and make any adjustments to suit your
preference:
Step 1. Power up the system.
Step 2. Pres s MENU to invoke the on-screen menu.
Step 3. Press SEL to step through the main options.
Step 4. Press either
+
or
-
button to bring up s ub-menus of the highlighted option.
Step 5. Press SEL to step through the sub-menu options.
Step 6. Press either
+
or
-
to modify the selected parameter
Pressing a button onc e increases or decreases the numerical value by a single digit.
Holding down a button increases the rate of change. Press MENU to return to the previous
screen.
Adjusting the OSD Parameters
The OSD c onsists of a main menu and sub-menus with
the following selections:
Brightness MENU
Manual adjus tment the brightness
Step 7. After you’ve made your adjustments press
MENU repeatedly until the OSD is turned off.
OSD Buttons
“ Manual”
“+”
“-“
“ Select”
1
2
1. power switch
2. ATX switch