PPC-V106 User Manual
16
Chapter 3 Hardware and Peripheral
Installation
3.1 Overview of Hardware Installation and Upgrading
The panel PC consists of a PC-based computer that is housed in a rugge-
dized aluminum enclosure. Any maintenance or hardware upgrades can
be completed after removing both panels..
3.2 Installing the 2.5" Hard Disk Drive (HDD)
You can attach one enhanced Integrated Device Electronics (IDE) hard
disk drive to the panel PC's internal controller which uses a PCI local-bus
interface. The advanced IDE controller supports faster data transfer and
allows the IDE hard drive to exceed 528 MB. The following are instruc-
tions for installation:
1.
Detach the HDD bracket by unscrewing the four screws (#2) on the
top of the HDD bracket.
Warning!
Do not remove the ruggedized aluminum covers
until you have verified that no power is flowing
within the panel PC. Power must be switched off
and the power cord must be unplugged. Every
time you service the panel PC, you should be
aware of this.
3
1
2
Screws
1930000112-M3x8L (Fixed, don't unscrew)
1933030500-M3x5L
1930030400-M3x4L
2
3
Summary of Contents for PPC-V106
