Advantech PPC-6150, User Manual

Page: 40 / 80

PPC-6150/6170 User Manual 30
2.7 Installing the Riser Card
(See the Appendix for card image)
When using the PCM-916, users need to configure PPCIEx1 interface as“PCIE
x4” Mode.
When using PCM-917/918/920, users need to configure PPCIEx1 interface as
“PCIE x1” Mode
For PPCIE interface configuration, please refer to "PCIE Mode Selection (x1,
x4)" in "BIOS Configuration" chapter.
1. Remove the rear cover of the panel PC.
2. Insert the riser card into the slot, and lock the two screws.(See Figure 2.38)
Figure 2.38
3. Remove the card slot back plate, and insert the needed card (See Fig 2.39),
then fix the screws and return the rear cover.
Figure 2.39