POC-S176 User Manual
2
1.1
Introduction
The POC-S176 is an Intel® Core
TM
Duo / Intel® Core 2 Duo Mobility processor-
based computer that is designed to serve as a Point-of-Care terminal (POC.) It is a
PC-based system with 17" color TFT LCD display, Single DVI-I Port, Dual on-board
10/100/1000 PCI-E Ethernet controller, Single COM port, Quad USB 2.0 port and a
24-bit stereo audio controller. With a built-in 2.5” HDD drive, the POC-S176 is as slim
and user-friendly as a notebook computer and generates low audible noise. For sys-
tem integrators, this silent, compact, mobile and highly integrated multimedia system
lets you easily build a Point-of-Care Terminal into your applications. The low audible
noise of POC-S176 makes it an ideal and safe Point-of-Care solution for patients and
hospital practitioners.
The POC-S176 is specially designed to resist spills and water damage, and ensures
dust resistance with its protected LCD, sealed ports, like a closed system. The high
contrast ratio (500:1) of POC-S176 makes it a perfect image terminal for PACS and
DICOM applications. The POC-S176 is a reliable solution to your application's pro-
cessing requirements.
1.2
Specifications
General
!
Dimensions (W x H x D):
436.5 x 376.5 x 91.5 mm (17.18" x 14.82" x 3.60")
!
Weight:
8 kg (17.6 lb)
!
Power Supply:
–
DC model:
100 watts max External DC Adapter- (Manufacturer: SINPRO
Inc. Model no.: MPU100-107) used within POC-S176XXXXXXXX
–
Input voltage:
100-240 VAC, 47-63 Hz, 1.25-0.5 A
–
Output voltage:
+18 VDC, 5.55 A max
!
Disk drive housing:
Space for one 2.5" SATA HDD
!
Entire system:
–
IPX1 water resistant rating
Hardware
!
CPU:
Intel® Core Duo® / Core 2 Duo® processor low voltage 1.66/1.5 GHz
(uFC BGA479)
!
BIOS:
Award 512 KB Flash BIOS, supports Plug & Play, APM
!
Chipset:
945 GME GMCH, (ICH7M)
!
Front side bus:
FSB 533/667 MHz
!
RAM:
200-pin DDR2 SODIMM slots x 2, supports unbuffered 533/667 MHz
DDR2-SDRAM (Non ECC), maximum capacity to 4 GB “For the memory-
mapped I/O (MMIO) space reserved, the 32-bit operating systems limit the total
available memory to 3.12 GB to avoid potential driver compatibility issues.”
!
IDE interface:
ATA/100 x 1. Supports one IDE device.
!
SATA interface:
SATA x 2. Supports one SATA device.
!
Serial ports:
RS-232 port x 1, all compatible with 16C550 UARTs. COM1 has
optical isolation; COM1 su5V by jumper selection.
!
Universal serial bus (USB) port:
USB 2.0 port x 6 (4 external, 2 internal)
!
Expansion slot:
Mini PCI/33MHz slot x 1, Mini PCI-E(2.5Gb/s) slot x 1
!
Watchdog timer:
supports Super I/O embedding watchdog function. Automati-
cally generates system reset when the system stops due to a program error.
!
CMOS battery (BIOS):
3.0 V @ 195 mA lithium battery
Summary of Contents for POC-S176 Series
