![background image](http://html1.mh-extra.com/html/advantech/poc-ipsm90ps/poc-ipsm90ps_user-manual_2858255029.webp)
21
POC-IPSM90PS User Manual
Chapter 3
B
attery
Maintenance
c) Ensure that the data settings in the config.ini file match the connected
COM port of the POC terminal/host device. The default setting is COM1.
4.
If the battery is not charging, follow the steps outlined below.
a) Check that the battery pack is correctly installed and fully inserted in the bat-
tery slot.
b) Check that the DC-IN cable is correctly connected.
NOTE: With this battery design, the charge capacity must be under 98% for the
charging function to be initialized. This eliminates the need for frequent charging. In
other words, if the battery capacity is 99% or 100%, the battery charging function will
not be activated.
Summary of Contents for POC-IPSM90PS
