Advantech PCM-9574, User Manual

Page: 40 / 124

28 PCM-9574 User's Manual
2.19 Ethernet configuration
The PCM-9574 is equipped with a high performance 32-bit PCI-bus
Ethernet interface which is fully compliant with IEEE 802.3U
10/100Mbps CSMA/CD standards. It is supported by all major
network operating systems.
The medium type can be configured via the RSET8139.EXE program
included on the utility disk. (See Chapter 3 for detailed information.)
2.19.1 100Base-T connector (CN1)
100Base-T connects to the PCM-9574 via an adapter cable to a 10-pin
polarized header (CN1). For 10Base-T RJ-45 operation, an adapter
cable converting CN1 into a standard RJ-45 jack is required.
2.19.2 Network boot
The Network Boot feature can be utilized by incorporating the Boot
ROM image files for the appropriate network operating system. The
Boot ROM BIOS files are on the included utility disk.
2.19.3 LAN controller power select(J12)
Table 2-13 LAN controller power select (J12)
+5 V* standby 5 V
* default setting
Note: PCM-9574 supports wake-on on LAN. For wake-
on LAN,J12 has to select standby 5 V (2-3
position)
3 2 1 3 2 1