Advantech PCM-9377, User Manual

Page: 52 / 128

PCM-9377 User Manual 38
3.7.6 Video Off Method
The option is “Blank Screen”, “V/H SYNC + Blank” or “DPMS Sup-
port”.
3.7.7 Modem Use IRQ
This determines the IRQ in which the MODEM can use.The choices: 3, 4,
5, 7, 9, 10, 11, NA.
3.7.8 Soft-Off by PWR-BTTN
If you choose “Instant-Off”, then pushing the ATX soft power switch but-
ton once will switch the system to “system off” power mode. You can
choose “Delay 4 sec.” If you do, then pushing the button for more than 4
seconds will turn off the system, whereas pushing the button momentarily
(for less than 4 seconds) will switch the system to “suspend” mode.
3.7.9 Wake up Event
3.7.9.1 VGA-OFF, ON
3.7.9.2 LPT & COM-NONE, LPT, COM, LPT/COM
When Enabled, the system will resume from suspend mode if FDD, COM
port, or LPT port is active. The choice: Enabled, Disabled.
3.7.9.3 HDD & FDD-OFF, ON
When Enabled, the system will resume from suspend mode if Primary
IDE 0 (1) or Secondary IDE 0 (1) is active. The choice: Enabled, Dis-
abled.
3.7.9.4 PCI Master-OFF, ON
3.7.9.5 Modem Ring Resume-Disabled, Enabled
3.7.9.6 RTC Alarm Resume
Set to “ON” to wake the system up from suspend mode as defined in
Resume Time. Date (of Month): Resume Time (hh: mm: ss).
When Enabled, your can set the date and time at which the RTC (real-
time clock) alarm awakens the system from Suspend mode. The choices:
Enabled, Disabled.
3.7.9.7 Primary INTR-OFF, ON