2 PCM-4153-A2 Startup Manual
Specifications
Mechanical and Enviromental
Dimensions (L x W):
96 x 115 mm (3.77”x 4.05”)
Mechanical Drawing (dxf file) is available.
Power Supply Type:
AT
Power Requirement:
+5 V ± 5%, +12 V ± 5% (Optional),
(5 V only, 12V optional for PC104 add on card and LCD
inverter)
Power Consumption:
(Geode LX800, 512 MB DDR333)
Max load:
+5 V@ 1.46 A, +12 V@ 0.02 A
Idle mode:
+5 V@ 1.37 A, +12 V@ 0.01 A
Conditions:
Test software:
Hot CPU pro 4.22
Power on - Boot:
Measure the maximum current value
of between system power on and boot-up to O.S.
Max. load:
Measure the maximum current value which
system under maximum load (CPU: Top speed , RAM &
Graphic: Full loading)
Idle mode:
Measure the current value when system in
windows mode and without running any program
Operating temperature:
0 ~ 60° C (32 ~ 140° F) ( opera-
tion humidity: 40°C @ 85% RH Non-Condensing)
Extended temperature support:
-20°C - 80°C: PCM-4153FZ-L0A2E
-40°C - 85°C: PCM-4153FZ2-L0A2E
Weight:
0.85 kg (reference weight of total package)
•
•
•
•
•
•
•
•
The board has a number of jumpers that allow you to
configure your system to suit your application.
The table below lists the function of each of the jumpers an
connectors.
Jumpers/Switch Setting
Label
Function
J2
DOTREF Select
J3
Clear CMOS
J4
Flash Master/Slave Select
J5
PCI VI/O Power Selector
CN39
COM2 Setting
Connectors
Label
Function
CN1
ATX Feature Power Connector (optional)
CN4
TFT LCD I/F
CN5
Inverter Power
CN6
SMBus
CN11
IDE
CN15
USB1/2 / CN17 USB 3/4
CN18
KB/MS
CN19
Print Port
CN20
RS422/485
CN23
ISA -5V & -12V Input
CN25
LAN1 / CN26 LAN2
CN27
CRT
CN30
COM1/2/3/4
CN32
AT Power / Reset / Buzzer Pin Header
CN33
Battery Connector
CN35
AUDIO-OUT / CN34 AUDIO-IN
CN36
GPIO1 / CN37 GPIO2
CN38
Power Input
Jumpers and Connectors
