Advantech PCL-841 Series, User Manual

Page: 25 / 37

2 4 PCL-841 Series User's Manual
Acceptance mask: Specifies the bit positions which are "relevant",
for acceptance filtering.
Note: The acceptance code and acceptance mask are configured
through eight digits (I digit per bit) using 0 or 1.
Value Definition
0 This bit position will accept only a’.relevantl message.
1 This bit position will not screen messages.
Example: Acc Code = 11111111
AccMask= 11111111
The shown acceptance filter will accept every received message.
Interrupt: Sets the interrupt for each port. Be sure that this
setting matches the IRQ already selected for the
PCL-841, which accepts values between IRQ3 to
IRQ15, except 8 and 13.
Running mode: During the normal configuration and communica-
tion process, select Normal Mode. When the
system fails, you can hit <Enter> to reset the
CAN controller. Hit <Enter> again to return to
Normal Mode to further execute your configura-
tion.
Monitor
Select the port to be monitored from the <Monitor> pull-down menu.
Press F3 to start and stop the monitoring process.
Monitor screen
The monitored data for a selected port appears in the monitor screen
(see area B in the diagram under Main Menu section.)
If the CAN controller is configured correctly and the transmission has
been successfully completed, every CAN object will be shown inorder
of appearance.