Advantech Co., Ltd.
17
PCI-1761 User’s Manual
www.advantech.com
After your card is properly installed on your system, you can now config-
ure your device using the
Device Installation Program
that has itself
already been installed on your system during driver setup. A complete
device installation procedure should include
device setup, configuration
and testing.
The following sections will guide you through the Setup,
Configuration and Testing of your device.
2.6 Device Setup & Configuration
The
Device Installation
program is a utility that allows you to set up, con-
figure and test your device, and later stores your settings on the system
registry. These settings will be used when you call the APIs of Advantech
32-bit DLL drivers.
Setting Up the Device
Step 1:
To install the I/O device for your card, you must first run the
Device Installation
program (by accessing
Start/Programs/
Advantech Driver for 95 and 98 (or for NT/2000)/Device Instal
lation).
Fig. 2-6 The Advantech Device Installation utility program
