Advantech PCI-1753, User Manual

Page: 18 / 38

1 4 PCI-1753 User's Manual
2.4 Installation Instructions
The PCI-1753/1753E can be installed in any PCI slot in the computer.
However, refer to the computer user's manual to avoid any mistakes
and danger before you follow the installation procedure below:
1. Turn off your computer and any accessories connected to the
computer.
Warning!: TURN OFF your computer power supply whenever
you install or remove any card, or connect and
disconnect cables.
2. Disconnect the power cord and any other cables from the back of
the computer.
3. Remove the cover of the computer.
4. Select an empty 5 V PCI slot. (If you also need to intall the
extension board, the PCI-1753E, to control more than 96 I/O points,
please find two adjacent 5V PCI slots.) Remove the screw that
secures the expansion slot cover to the system unit. Save the screw
to secure the interface card retaining bracket.
5. Carefully grasp the upper edge of the PCI-1753. Align the hole in
the retaining bracket with the hole on the expansion slot and align
the gold striped edge connector with the expansion slot socket.
Press the card into the socket gently but firmly. Make sure the card
fits the slot tightly.
5.1. Repeat Step 5 for the PCI-1753E.
5.2. Connect the PCI-1753 and PCI-1753E with the 10-cm 20-pin flat
cable, which is shipped with the PCI-1753E.
Caution!: Please note that the first pin* of the cable connector
should match the first pin* of the connector CN2 on
the PCI-1753/1753E. (* first pin as marked by the
arrow on each connector