FC
Configuration card PCI-1612B
(RS422/485)
4- 516124
6 / 11
By default,
-
Port 1 and 2 must be setup as RS422
-
Port 3 and 4 must be setup as RS485
Channel 3 is the last one
and channel 4 is located to just
above the last one
.
RS232 settings:
If needed, this card can be configured in RS232 mode.
In that case, the jumpers of the left column (Cn5 to Cn8) must be removed and the
jumpers of the right column (Cn1 to Cn4) must be moved to the left.
4. Driver installation
The driver is the same as the one use for the PCI-1610B card (RS232)
If it is already installed, it is not necessary to re-install it.
Install the software driver before you install the hardware into your system, since this
will guarantee a smooth and trouble-free installation process.
Follow the steps below for PCI communication card Windows OS driver installation.
1.
Insert your companion DVD-ROM disc into your DVD-ROM drive.
2.
The driver setup program will be launched automatically. If the auto-play function
is not enabled on your system, use Windows Explorer or the Windows Run
command to execute autorun.exe on the companion DVD-ROM.
Ports 1 = by default RS422 = Right
Ports
4
= by default RS485 = Center
Ports 2 = by default RS422 = Right
Ports
3
= by default RS485 = Center
All ports = Internal terminating 120 Ohms resistors
2 jumpers must be set to the left of each port
