Advantech PCE-3032 User Manual Download Page 76

Page: 76 / 104

PCE-3032/4132 User Manual

7.1

Introduction

PCE-3032/4132 has dual Gigabit Ethernet LANs via dedicated PCI Express x1 lanes

(For PCE-3032, LAN1 and LAN2 are Intel I211AT; for PCE-4132, LAN1 and LAN2

are Intel I210AT) that offer bandwidth of up to 500 MB/sec, eliminating network data

flow bottlenecks and incorporating Gigabit Ethernet at 1000 Mbps.

7.2

Installation

PCE-3032/4132 Gigabit integrated controllers support all major network operating

systems. However, the installation procedure varies from system to system. Please

find and use the section that provides the driver setup procedure for the operating

system you are using.

7.3

Windows 10 Driver Setup (LAN)

Insert the driver CD into your system’s CD-ROM drive. Navigate to the "03_LAN"

folder and click "Autorun.exe" to complete the installation of the driver.

Note!

Before installing the LAN drivers, make sure the Chipset driver has been

installed on your system. See Chapter 5 for information on installing the

Chipset driver.

Note!

Wrong driver installation may cause unexpected system instability.

Summary of Contents for PCE-3032









































































































Search results

Summary of Contents for PCE-3032

Reviews:

Brands by name

Popular brands

Advantech PCE-3032, User Manual

Search results

Summary of Contents for PCE-3032

Reviews:

Brands by name

Popular brands