Advantech PCA-6194 User Manual Download Page 2 | Manualshive

Page: 2 / 137

background image

PCA-6194 User Manual

ii

Copyright

This document is copyrighted, 2007, by Advantech Co., Ltd. All rights
are reserved. Advantech Co., Ltd. reserves the right to make improve-
ments to the products described in this manual at any time without notice.
No part of this manual may be reproduced, copied, translated or transmit-
ted in any form or by any means without the prior written permission of
Advantech Co., Ltd. Information provided in this manual is intended to
be accurate and reliable. However, Advantech Co., Ltd. assumes no
responsibility for its use, nor for any infringements upon the rights of
third parties which may result from its use.

Acknowledgements

• AWARD is a trademark of Phoenix Technologies Ltd.
• IBM and PC are trademarks of International Business Machines Cor-

poration.

• Intel®, Core™ 2 Duo, Pentium® D, Pentium® 4, and Celeron® D are

trademarks of Intel Corporation.

• WinBond is a trademark of Winbond Corporation.
• All other product names or trademarks are the properties of their

respective owners.

Part No. 2002619400 1st Edition
Printed in Taiwan

November 2007

«
1
2
3
4
...
»

Summary of Contents for PCA-6194










































































































































Reviews:

No comments

Related manuals for PCA-6194

Brand: OmniCell Pages: 23

Brand: Identiv Pages: 5

Brand: Identiv Pages: 79

APG8201 PINhandy 1

Brand: ACS Pages: 8

Brand: Datapath Pages: 13

Brand: Cansec Pages: 14

Brand: StarTech.com Pages: 16

ADIO1600 Series

Brand: ICS Advent Pages: 72

Brand: Salto Pages: 5

Brand: CDVI Pages: 20

Brand: Ednet Pages: 2

Brand: Cansec Pages: 6

Brand: AUDIOLINE Pages: 2

Brand: Acces I/O products Pages: 5

Brand: Diablotek Pages: 1

ReSpeaker Core v2

Brand: SeeedStudio Pages: 20

Brand: ZKTeco Pages: 11

Brand: B&B Electronics Pages: 61

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands