Advantech PCA-6010, User Manual

Page: 13 / 96

3 PCA-6010 User Manual
Chapter 1
H
ardware
C
onfiguration
1.2 Features
! Compliance with PICMG 1.0
! Supports LGA 775 Intel® Core™ 2 Duo / Pentium® Dual-Core / Pentium® D /
Pentium® 4 / Celeron® 400 / Celeron® D FSB 533/667/800/1066 MHz proces-
sors (refer to “Processor Support” on page v)
! Supports Dual Channel DDR2 533/667 SDRAM up to 4 GB
! Single Gigabit Ethernet via PCI Express x1 port
! 4 SATA2 connector
! 8 USB 2.0 ports
! 2 COM port supports RS-232
! CMOS automatic backup and restore to prevent accidental data loss of BIOS
setup
1.3 Specifications
1.3.1 System
! CPU: Intel® LGA 775 Core™ 2 Duo, Pentium Dual-Core, Pentium 4, Celeron D
up to 2.93/2.7/3.4/3.6 GHz, (refer to “Processor Support” on page v), FSB 533/
667/800/1066 MHz. PCA-6010 also has an optional CPU cooler (1750000332)
for customers who use high-speed CPUs in 2U chassis or in a high-temperature
environment.
! L2 cache: CPU has built-in 4 MB (for Core™ 2 Duo), 2 MB (for Pentium Dual-
Core CPU), 2 MB (for Pentium 4 CPU), 512 KB (for Celeron D CPU) full-speed
L2 cache
! BIOS: Award Flash BIOS (8 MB Flash Memory)
! System chipset: Intel 945GC with ICH7
! SATA/EIDE hard disk drive interface: Four on-board SATA2 connectors with
data transmission rate up to 300 MB/s. One on-board IDE connector supporting
up to two enhanced IDE devices. Supports PIO mode 4 (16.67MB/s data transfer
rate) and ATA 33/66/100 (33/66/100MB/s data transfer rate.) BIOS enabled/dis-
abled.
! Floppy disk drive interface: Supports two floppy disk drive, 5¼" (360 KB and
1.2 MB) or 3½" (720 KB, 1.44 MB). BIOS enable/disable.
1.3.2 Memory
! RAM: Up to 4 GB in two 240-pin DIMM sockets. Supports dual-channel DDRII
533/667 SDRAM.