manualshive.com logo in svg

Advantech PCA-6010, User Manual, Page: 56 / 96

Share
Download
Advantech PCA-6010 User Manual Download Page 56

PCA-6010 User Manual

46

4.1

Before You Begin

To facilitate the installation of the enhanced display drivers and utility software, read 
the instructions in this chapter carefully. The drivers for the PCA-6010 are located on 
the software installation CD. The Intel® Chipset Software Installation Utility is not 
required on any systems running Windows NT 4.0. Updates are provided via Service 
Packs from Microsoft*.

Before you begin, it is important to note that most display drivers need to have the
relevant software application already installed in the system prior to installing the
enhanced display drivers. In addition, many of the installation procedures assume
that you are familiar with both the relevant software applications and operating sys-
tem commands. Review the relevant operating system commands and the pertinent
sections of your application software’s user manual before performing the installa-
tion.

4.2

Introduction

The Intel® Chipset Software Installation (CSI) utility installs the Windows INF files 
that outline to the operating system how the chipset components will be configured. 
This is needed for the proper functioning of the following features:

!

Core PCI and ISAPNP Services

!

PCIe Support

!

IDE/ATA33/ATA66/ATA100 Storage Support

!

SATA Storage Support

!

USB Support

!

Identification of Intel (R) Chipset Components in the Device Manager

Note!

The files on the software installation CD are compressed. Do not 
attempt to install the drivers by copying the files manually. You must use 
the supplied SETUP program to install the drivers.

Note!

This utility is used for the following versions of Windows system, and it 
has to be installed before installing all the other drivers:

!

Microsoft Windows Vista

!

Microsoft Windows Vista x64 Edition

!

Microsoft Windows XP Professional x64 Edition 

!

Microsoft Windows XP with Service Pack 2

!

Microsoft Windows 2000 with Service Pack 4

Summary of Contents for PCA-6010

































































































Reviews:

No comments