Advantech PAX-332-C8 Series, User Manual, Page: 35 / 52

29 PAX-332 User Manual
C
ha
pte
r 3
O
SD
M
en
u
3.1.6 Advance
Menu Description Default Remarks
Aspect Ratio
Used to select one of the various screen
aspect ratios.
Full
Over Scan
Used to activate/deactivate the over scan
function. [ON,OFF]
OFF
Switching Time Used to set the screen switching time. 2
DDCCI
Used to activate/deactivate the DDCCI
function. [ON,OFF]
ON
Display Data
Channel
Command
Interface
Ultra Vivid
Used to configure the ultra vivid screen.
[OFF, L, M, H]
OFF
Over Scan Ratio
Used to adjust screen over-scan ratio.
* After adjusting the over-scan ratio, set the
Over Scan menu from Off to On.
10
DP Option
(Option)
Used to select a DP Version.
[D0, D1, D6]
D0
DP MST
(Option)
Used to select a Multi stream transport.
[OFF, D0, D1, D6]
Clone mode should be set to Off to select
DP MST.
DP MST is active only if INPUT is selected
as DP.
Setting INPUT to AUTO SELECT disables
DP MST.
OFF
Display Port
Multi
Stream
Transport
DP EDID
(Option)
Not applicable
Clone mode
(Option)
Used to activate/deactivate the Clone
mode. [OFF, ON]
DP MST should be set to OFF to select
Clone mode.
For Clone mode to operate at 4K_60 Hz,
the DP option/D0 on the sub-monitor must
also be set to 1.2.
ON
Apply in 1P
Mode