Advantech PAX-327-C8 Series, User Manual

Page: 27 / 56

21 PAX-327-C8 User Manual
C
ha
pte
r 2
In
sta
lla
tio
n
2.2.4.10 PAX-327-C8J-HAS (Ndcoder Optional)
1. DC switch
2. DC power input: +24V power connector
3. DC power output: +5V/+12V power connector
4. RS-232C
5. DVI input/output
6. HDMI input/output
7. DP input/output
8. USB up
9. SFP+ (optional)
10. Status (optional)
11. LAN (optional)
2.2.5 Interface on AVAS Back Panel
2.3 Viewing Angle
The PAX-327-C8 LCD monitor can be vertically adjusted to the preferred viewing
angle for maximum comfort.
Name Function
SFP+ SFP+ port for SFP+ modules only
Status LED
Status LED, will indicate the AVAS operational status:
a. Blinking green: operating as normal
b. Blinking orange: warning notification
c. Continuous orange: FPGA is starting up
d. Blinking red: error notification
e. Off: no power supplied to the device
1GbE 1GbE (RJ45) has no function yet
Note! If the power supply cable is unplugged from the power outlet, the AVAS
will be disconnected. The power outlet socket should be located near
the equipment and be easily accessible.
Caution! Do not force the monitor past its maximum extension in any direction as
this may damage the monitor and the monitor stand.