Advantech MIO-5850 User Manual Download Page 70

Page: 70 / 82

MIO-5850 User Manual

21.

Click on “Security” Tab and click on “Edit”.

22.

Select currently login name and change access permission to full control. Then,
click on “Ok”.

23.

Clock “Ok” on popup windows. Then, you can replace “storport.sys” file.

24.

Unmount and commit the install.wim image.
C:\windows\system32>dism /Unmount-Wim /MountDir:E:\temp /Commit

25.

Done for injecting storport.sys into Windows 7 64Bit SP1 installer.

26.

Replace the boot.wim and install.wim in the USB pendrive with Windows 7 64Bit
installer in folder: <USB pendrive>:\sources\. The installer is ready to use.

27.

Copy the Intel eMMC/SD card driver(iaiosd folder) to the installer pendrive.

28.

Go to BIOS setup menu, and go to “Advance\Miscellaneous configuration\OS
selection” and set to “Windows 7”

Summary of Contents for MIO-5850



















































































Search results

Summary of Contents for MIO-5850

Reviews:

Related manuals for MIO-5850

Brands by name

Popular brands

Advantech MIO-5850, User Manual

Search results

Summary of Contents for MIO-5850

Reviews:

Related manuals for MIO-5850

Brands by name

Popular brands