Advantech MIC-710AIL, User Manual, Page: 25 / 32

13 MIC-710AIL(X) User Manual/
用户手册
C
ha
pte
r 2
H
/W
In
sta
lla
tio
n
硬
件
安
装
硬
體
安
裝
2.2.5 SIM Slot/
SIM 端口/SIM 埠
MIC-710AIL/MIC-710AILX provides 1pcs Nano SIM slot internally for SIM card. For
MIC-710AILX, MiniPCIe function is disabled when the onboard switch SW-2 is
changed to OFF for SIM card function enabled. (SW1-2 default is ON)
MIC-710AIL/MIC-710AILX 在本机内部提供 1 组 mini-PCIE 端口供 mini-PCIE 卡片
使用，当使用 MIC-710AILX 的 SIM card 功能时，必须将 SW1-2 切换为 OFF 先关闭
miniPCIe 功能。 (SW1-2 预设值是 ON)。
MIC-710AIL/MIC-710AILX 在本機内部提供 1 组 mini-PCIE 端口供 mini-PCIE 卡片
使用，當使用 MIC-710AILX 的 SIM card 功能時，必須將 SW1-2 切換為 OFF 先關閉
miniPCIe 功能。(SW1-2 預設值是 ON)
2.3 USB Recovery Mode/
USB 更新模式/USB 更新模式
To update your MIC-710AIL/MIC-710AILX, you must be in Force USB Recovery
Mode. When in Force USB Recovery Mode, you can update system software and
write partition configuration to the device.
1. Please prepare one HOST PC. (About more HOST PC detail, please refer to
software update SOP.)
2. Before flashing MIC-710AIL/MIC-710AILX, you must turn MIC-710AIL/MIC-
710AILX into Force Recovery Mode manually.
(1) Shut down the MIC-710AIL/ MIC-710AILX and open the rear door.
(2) Connect HOST PC and MIC-710AIL/ MIC-710AILX Micro USB with USB
cable.
(3) Press and hold the REC (SW_REC1) button for recovery.
(4) Press the RST (SW_RST1) button for reset.
(5) After 5s release the REC (SW_RST1) button.
Make sure MIC-710AIL/ MIC-710AILX is recognized by HOST PC successfully:
Type command: lsusb in HOST PC. If you see: NVIDIA Corp. It means MIC-
710AIL/MIC-710AILX is in recovery mode.
MIC-710AIL-00B1 MIC-710AILX-00B1
Root password mic-710ail mic-710ailx