background image

ST

AR

TUP MANUAL

MIC-3327 Startup Manual  1

MIC-3327DC01-A43E

3U CompactPCI® Intel® Atom™ N2600 Controller

Packing List

Before you begin installing your module, please make 

sure that the following materials have been shipped:

 

ƒ

MIC-3327 Series CPU Board 

 

ƒ

Driver CD 

 

ƒ

Startup Manual

If any of these items are missing/damaged, contact
your distributor or sales representative immediately.

Overview

The MIC-3327 is a 3U CompactPCI

®

 system 

control board, with an Intel® Atom™ N2600 

1.6GHz processor and highly integrated Intel® 

NM10 Express chipset. It supports on board DDR3 

SDRAM up to 2 GMB and dual Gigabit Ethernet.
The MIC-3327 is a powerful 3U CompactPCI 

controller which can fulfill your need in any mission 

critical applicaitons, such as transportaiton, traffic 

control, and military defense applicaitons.

User Manual

tion

For detailed information on this product, refer to: 

CD:MIC-3327\Manual\MIC-3327_User_Manual.pdf

Notes

For more information on this and other Advantech
products, please visit our websites at:

http://www.advantech.com
http://www.advantech.com/eAutomation

For technical support and service:

http://www.advantech.com.tw/eservice

This manual is for MIC-3327.
Part No: 2003332700

1st Edition
February 2014

Declaration of Conformity

FCC Class A

This equipment has been tested and found to comply 

with the limits for a Class A digital device, pursuant 

to part 15 of the FCC Rules. These limits are 

designed to provide reasonable protection against 

harmful interference when the equipment is operated 

in a commercial environment. This equipment 

generates, uses, and can radiate radio frequency 

energy and, if not installed and used in accordance 

with the instruction manual, may cause harmful 

interference to radio communications. Operation 

of this equipment in a residential area is likely to 

cause interference in which case the user is required 

to correct interference at his own expense. 

CE

This product has passed the CE test for environmental 

specifications when shielded cables are used 

for external wiring. We recommend the use of 

shielded cables. This kind of cable is available from 

Advantech. Please contact your local representative.

 

Summary of Contents for MIC-3327DC01-A43E








Reviews: