background image

MARS-1030 User Manual

130

Check Name

. If there is only one match, the e-mail address is 

inserted. If there is more than one match, select the correct 
address from the 

Choose E-mail Recipients

 dialog box. If 

there is no match then add a new e-mail address through 

Choose E-mail Recipients

.

To attach a file, select 

File> attachments> Add Attachment

.

Select 

File> Send

. If you are working offline, the message is 

moved to the Outbox folder and will be sent the next time you 
connect.

Tip: 

to see more header information, select the triangle in the lower-right 

corner of the header area. Select the triangle again to collapse the header 
area.

*

Save a message:

Select File> Save to save the message you are composing or 
editing.
The message is not sent and is saved in the inbox folder of the 
active service.

*

Reply to or forward a message:

Open the message, and then select 

Compose> Reply to 

Sender, Reply to All, or Forward

.

Enter your response.

Select 

File> Send

.

Tips:

Selections in the Options dialog box determine whether the original 
text is included.

To see more header information, select the inverted triangle in the 
lower-right corner of the header area. Select the triangle again to 
collapse the header area.

*

Check Inbox status:

In list view, select 

Compose> Status

. You can view details 

such as the number of messages to be sent, deleted, and copied, 
and the number of attachments to be downloaded.

*

Download message from the server:

When you download messages, you need to create two connec-
tions: a remote connection and a mail server connection. The 
remote connection connects you and your ISP or network. The 
mail server connection downloads messages from your mail 

Summary of Contents for MARS-1030





















































































































































































































Reviews: