Confidential and Proprietary
26
4
Setting Up the ELSA-M Web Portal
Ensure that your ELSA-M Access Point is connected to your computer that the Router(s) and
tags are installed throughout your premises and are powered on.
NOTE: All tags must be “awake” prior to starting the ELSA-M web portal for the first time.
4.1
ELSA-M Start-Up Tasks
On your desktop double-click on the ELSA-M icon to launch the application service.
These next few tasks will only need to be performed the first time you access the ELSA-M Web
Portal and are required to enable system device deployment.
Please type in the name of your business, store, premises, etc and click
OK
to continue.
NOTE:
Your computer has already been configured to work with the default setting for the
Access Point (see
Computer Configuration for System Installation
Section 2.7
Type
Yes
and click
OK
to continue
Note
: If your computer IP has not been changed to match the default requirements or if you
select
No
to the above then the installation will stop.
Before the Web Portal service begins you may receive a Windows Security Alert pop-up as
shown below
