Advantech ITA-1611 Series, User Manual

Page: 30 / 70

ITA-1611 User Manual 20
3.1.3 Installing the HDD Module
ITA-1611 reserves the space for installing a 2.5" HDD module. Please refer to the fol-
lowing instructions to install the HDD.
1. Place the HDD into 2.5” HDD holder, and lock it with 4 screws.
2. The HDD holder has four semi-circles (two bigger and two smaller) on both
sides, which are used to place rubber cushions, with the black ones for bigger
semi-circles and transparent ones for smaller semi-circles.
3. Place the HDD holder onto HDD bracket, and secure it with four screws.
4. Connect the complete HDD module to the chassis and fix it with four screws.
5. Stick the cooling pad onto the PCB panel of HDD. Please align the cooling pad
with the magnetic head to protect the head from being covered.
Figure 3.3 Installing the HDD Module