Advantech IPPC-6152A User Manual Download Page 29

Page: 29 / 72

IPPC-6152A/6172A/6192A User Manual

Chapter 2

ystem

Setup

2.6

Installing CFast Riser Card (Optional)

Take out the screws from the accessory box and install the CFast riser card, see
below. (CFast module part No. IPPC-6152-CFASTE)

Plug in the power cable (within the CFast module), and connect the other end of the
cable to Power 4PIN.

Plug in the data line, connect the other end to the SATA4 port of the mainboard.

2.7

Mounting Instructions

There are two ways to mount the system: panel mounting or rack mounting.

2.7.1

Panel Mounting

Take the four mounting brackets out of the accessory box.

Attach the four mounting brackets by inserting the screws into the keyhole slots
on the cover of the monitor.

Use the screws to secure the brackets to the cover. Tighten the screws to
secure the monitor to the back panel.

2.7.2

Rack Mounting

Please order IPPC-6152A-RMKE, IPPC-6172A-RMKE, or IPPC-6192A-RMKE option
kit to install to 19” industrial rack. For the detailed installation process, please refer to

IPPC-6152-6172-6192_Series_Mount_Installation_Guide(EN&CH)

installation guide

accompanied by the machine.

Summary of Contents for IPPC-6152A









































































Search results

Summary of Contents for IPPC-6152A

Reviews:

Related manuals for IPPC-6152A

Brands by name

Popular brands

Advantech IPPC-6152A, User Manual

Search results

Summary of Contents for IPPC-6152A

Reviews:

Related manuals for IPPC-6152A

Brands by name

Popular brands