Advantech IPPC-5211WS Series, User Manual

Page: 18 / 80

IPPC-5211WS Series User Manual 10
2.2 Transport and Unpacking
When accepting a delivery, please check the packaging for visible transport damage
and check the delivery for completeness by comparing it with your order. If you notice
any shipping damage or inconsistencies between the contents and your order,
please inform the responsible delivery service immediately.
During transport, the IPPC should be protected from excessive mechanical stress. If
the IPPC is transported or stored without packaging, shocks, vibrations, pressure
and moisture may impact the unprotected unit. A damaged packaging indicates that
ambient conditions have already had a massive impact on the device. Therefore,
please use the original packaging during transportation and storage.
If the IPPC is transported in cold weather or is exposed to extreme variations in tem-
perature, make sure that moisture (condensation) does not build up on or inside the
HMI device. Moisture can result in short-circuits in electrical circuits and damage the
device. To avoid that, please store the IPPC in a dry place and bring the IPPC to
room temperature before starting it up. If condensation occurs, a delay time of
approximately 12 hours must be allowed to make sure the IPPC is completely dry
before the IPPC is switched on.
2.3 Mounting Type
2.3.1 VESA mounting
1. Please ensure VESA equipment dimension as 100 x 100 mm.
2. Take screws from the accessory box.
3. Insert the screws into every screw holes and fasten them. These screws will
push the VESA mounting and fix the unit.