Advantech INTRAC INTRAC-305 Installation & User Manual Download Page 2

Page: 2 / 96

PREFACE

INTRAC-305

Page

INTRAC-305 MANUAL - ISSUE

3.2

Advantech Wireless

PREFACE

This equipment manual provides user/operational and
installation information on the Advantech AMT Limited
INTRAC-305 Satellite Tracking Antenna Controller.

MANUAL SECTIONS :-

Introducing the INTRAC-305

An overview of the INTRAC-305.

Safety

Safe usage of the INTRAC-305.

Specification & Options

The supplied specification, the fitted options and the available
options.

Operating the INTRAC-305

How to use and operate the INTRAC-305.

Alarms

A description of the alarm conditions which can occur.

Technical Description

A technical description of the operation of the INTRAC-305.

Installation

How to install and set-up an INTRAC-305 system, includes
information on the external connections to the INTRAC-305.

Fault Finding

Assistance in finding any faults which may arise.

Warranty and Repair

Warranty and repair service provided by Advantech AMT

Information

Ltd.

Summary of Contents for INTRAC INTRAC-305

































































































Search results

Summary of Contents for INTRAC INTRAC-305

Reviews:

Brands by name

Popular brands

Advantech INTRAC INTRAC-305, Installation & User Manual

Search results

Summary of Contents for INTRAC INTRAC-305

Reviews:

Brands by name

Popular brands