Advantech INTEL PCM-9587, User Manual

Page: 10 / 82

PCM-9587 User Manual 2
1.1 Introduction
The PCM-9587 series is a EBX SBC (Single Board Computer) designed with the
powerful Intel Celeron M processor, and Intel 852GM and 6300ESB chipsets, which
supports Dynamic Video Memory Technology For maximum performance. PCM-
9587 also supports one 184 PIN DIMM socket for ECC DDR memory up to 1GB.
These chipsets are specifically for embedded computing and provide an optimized
on-board integrated graphics solution.
Other on-board features include 1 EIDE, 2 SATAs, 1 FDD, 1 LPT, 4 USB2.0, 4 serial
ports(3 x RS-232 and 1 x RS-232/422/485), PS/2 KeyBoard/mouse, watchdog. The
SSD solution supports Type I/II CompactFlash cards.
The PCM-9587 complies with EBX form factor (Embedded Board eXpandable). It is
compact and suitable for embedded applications, yet large enough to contain the
functions of a full embedded computer system. The EBX system expansion is based
on popular existing industry standards-PC/104
TM
, PCI, and PC/104-Plus
TM
, hence
the PC/104-Plus interface on PCM-9587 brings the advantages of a wide variety of
embedded system expansion modules. The expandability can also be fulfilled by the
MiniPCI socket on the solder side.
1.2 Features
„
Embedded Intel® Celeron® M 600 MHz/Celeron® M 1.0 GHz
„
Supports ECC DDR memory up to 1 GB, accept 128/256/512/1024 MB
DDR200/266 DRAM
„
EBX form factor standard and support for PC/104-Plus bus
„
Supports 10/100Base-T Ethernet
„
Supports up to two channel 36-bit LVDS interface
„
Wide temperature optional
„
2 x SATA 150 (RAID 0/1), 4 x COM, 4 x USB 2.0, 8 bit GPIO
„
Support PC/104-Plus (PCI + 8-bit ISA), Mini PCI and 1 x PCI Slot
1.3 Specifications
Standard SBC Functions
„
CPU: Supports onboard Celeron® M processor
„
BIOS : Award 4 Mbit byte Flash memory
„
System memory: One 184 pin DIMM sockets, support ECC
Double Data Rate (DDR)128 MB to 1 GB, accepts 128/256/512/1000 MB
DDR200/266 DRAM.
„
System chipset:Intel 852GM GMCH/6300ESB Chipset 400MHz FSB
„
Enhanced IDE interface: One Enhanced IDE interface supports 2 IDE devices.
PIO mode 3 or mode 4, Ultra DMA 100 transfer. 2 Serial ATA standard connec-
tor to support SATA 150
„
FDD interface: Supports one FDD
„
Serial ports: Three serial RS-232 ports, one serial RS-232/422/485 ports
„
Parallel port: One parallel port, supports SPP/EPP/ECP mode
„
Keyboard/mouse connector: Supports standard PS/2 keyboard and a PS/2
mouse
„
Power management: APM Rev. 1.2 compliant power management ACPI sup-
port