Advantech IDK-1121WP Series, User Manual

Page: 16 / 35

IDK-1121WP User Manual 10
2.3 Interface Connections
2.3.1 LCD Module
 LCD Connector (CN1) : IS100-L30O-C23 (UJU) , GT103-30S-HF15 (LSM),
GT103-30S-HF15-M (LSM)
 Mating Connector : FI-X30C2L (Manufactured by JAE) or Equivalent
Table 2.3: MODULE CONNECTOR(CN1) PIN CONFIGURATION
No Symbol Description No Symbol Symbol
1 FR0M Minus signal of odd channel
0 (LVDS) 16 SR1P Plus signal of even channel 1
(LVDS)
2 FR0P Plus signal of odd channel 0
(LVDS) 17 GND Ground
3 FR1M Minus signal of odd channel
1 (LVDS) 18 SR2M Minus signal of even channel
2 (LVDS)
4 FR1P Plus signal of odd channel 1
(LVDS) 19 SR2P Plus signal of even channel 2
(LVDS)
5 FR2M Minus signal of odd channel
2 (LVDS) 20 SCLKINM Minus signal of even clock
channel (LVDS)
6 FR2P Plus signal of odd channel 2
(LVDS) 21 SCLKINP Plus signal of even clock
channel (LVDS)
7 GND Ground 22 SR3M Minus signal o f even channel
3 (LVDS)
8 FCLKINM Minus signal of odd clock
channel (LVDS)
23 SR3P Plus signal of even channel 3
(LVDS)
9 FCLKINP Plus signal of odd clock
channel (LVDS)
24 GND Ground
10 FR3M Minus signal of odd channel
3 (LVDS) 25 NC No Connection (I2C Serial
interface for LCM)
11 FR3P Plus signal of odd channel 3
(LVDS) 26 NC No Connection.(I2C Serial
interface for LCM)
12 SR0M Minus signal of even chan-
nel 0 (LVDS) 27 ITLC Interlace mode selection
13 SR0P Plus signal of even channel
0 (LVDS) 28 VLCD Power 5.0V
14 GND Ground 29 VLCD Power 5.0V
15 SR1M Minus signal of even chan-
nel 1 (LVDS) 30 VLCD Power 5.0V
Note! 1. All GND (ground) pins should be connected together and to Vss
which should also be connected to the LCD’s metal frame.
2. All VLCD (power input) pins should be connected together.
3. Input Level of LVDS signal is based on the IEA 664 Standard.
4. Always make sure LVDS signal and clock inputs should be 4 chan-
nels and synchronized.
5. Basically Panels cannot support “Interlaced Scan Method” and
ITLC is Interlace Image Sticking Reduction Mode selection pin.
(L: Normal Mode, H: Interlace Image Sticking Reduction Mode)
If you don’t use this pin, it should be connected to GND.
(Low level Input Voltage : GND ~ 0.4V, High level Input Voltage :
1.6 ~ 3.6V)