Advantech IDK-1119R-35SXA1E, User Manual

Page: 32 / 41

IDK-1119R User Manual 26
Advantech ETM-RES04C Touch Control Board is the ultimate combo board. This
touch panel controller provides optimum performance for your analog resistive touch
panels for 5 wire models. It communicates with the PC directly through USB and RS-
232 connectors. The touch panel driver emulates mouse left and right button func-
tions.
6.1 Touch Controller Characteristics
6.1.1 Specifications

Electrical Features
– +5 Vdc/ 100 mA typical, 50mV peak to peak maximum ripple and noise.
– Bi-directional RS-232 serial communication and USB 1.1 full speed
– Report rate of RS-232 is 180 points/sec (max.). And, USB is 200 points/sec
(max.)
– Unaffected by environmental EMI
– Panel resistance of 5-wire resistive model is from 50 to 200 ohm (Pin to pin
on same layer)
– Touch resistance under 3K ohm
 Serial Interface
– EIA 232E (Serial RS-232)
– No parity, 8 data bits, 1 stop bit, 9600 baud (N, 8, 1, 9600)
– Support Windows 2000/ Vista/ XP/ 7, Windows CE 5.0/ 6.0/ 7.0, Windows
NT4, Linux, DOS, QNX
 USB Interface
– Conforms to USB Revision 1.1 full speed.
– If the USB is connected to the controller, the controller will communicate over
the USB, and will not communicate over the serial port.
– Supports Windows 2000/ Vista/ XP/ 7, Windows CE 5.0/ 6.0/ 7.0, Linux, QNX
 Touch Resolution
– 2,048 x 2,048 resolution
 Response Time
– Max. 20 ms
6.1.2 Environmental Features
 Reliability
– MTBF is 200,000 hours
 Temperature Ranges
– Operating : -25°C ~ 85°C
– Storage : -25°C ~ 85°C
 Relative Humidity