Advantech IDK-1115WP-45FHA2, User Manual, Page: 26 / 37

IDK-1115WP-45FHA2 User Manual 20
3.1 Touchscreen
3.1.1 Touch Characteristics
IDK-1115WP series products use projected capacitive (PCAP) touch screens.
3.1.2 Optical Characteristics
3.1.3 Mechanical Characteristics
3.2 Touch Control Board
Advantech’s IDK-1115WP-45FHA2 projected capacitive touch screen adopts a COB
(Chip on Board FPC) design with EETI EXC80H84 touch controller. An extra touch
control board is required and bundled in this model. This communicates with a PC
directly through USB connectors. This superior design is sensitive, accurate, and
user friendly.
Table 3.1: Optical Characteristics
Item Specifications
Transparency 88±3%
Haze 5±3%
Table 3.2: Mechanical Characteristics
Item Specifications
Surface Hardness 7H (The hardness test follows up the JIS-5400 Serils industry
standard)
Cover Lens Thickness 1.9 mm; 0.74 in
Overall Thickness 2.8 ± 0.20 mm 0.11 ± 0.007 in
Static Load 500g within 10cm 2 area for 30sec
Controller and Tail Type COB (Chip on Board)
FPC Tail Bending Radius FPC bending 10 times or more by R1mm angle 500g, each
bending 180°
Meet electrical specs after test.
Holding Force for Tail 500 g (Peeling at an angle 90° towards the film)
Top Surface Finish Type Anti-Fingerprint (water contact angle>105°)
Decoration Lens Artwork Black border