Advantech IDK-1112P-50XGA1, User Manual

Page: 26 / 35

IDK-1112P User Manual 20
3.1 Touchscreen
3.1.1 Touch Characteristics
IDK-1112P series products use projected capacitive touchscreens.
3.1.2 Optical Characteristics
3.1.3 Mechanical Characteristics
3.2 Touch Controller
Advantech’s IDK-1112P series projective capacitive touch screen adopts a COF
(Chip on FPC) design so an extra touch control board is not required. This communi-
cates with a PC system directly through USB connectors. The superior design is sen-
sitive, accurate and user friendly.
Item Specifications
Transparency 88±2%
Haze < 0.5%
Item Specifications
Surface Hardness 7H (Follows JIS K 5600 standard, use Mitsubishi Pencil 750g)
Cover Lens Thickness 1.8mm
Overall Thickness 2.33±0.20mm
Compressive Stress >=400 Mpa
Controller and Tail Type
COF (Chip on FPC tail)
FPC Tail Bending Radius R2.5mm
Holding Force for Tail 0.7kg to pull strength and sustain minutes in straight-line pull-
ing (180 degrees) and 90 degrees pulling orientation
Connector Pins & Pitch 4pins, pitch is 1.25mm
Top Surface Finish Type Clear
Decoration Lens Artwork Black border