Advantech IDK-1110WR Series, User Manual, Page: 32 / 37

IDK-1110W User Manual 26
6.1 Touch Controller Characteristics
Advantech ETM-RES05C Touch Control Board is the ultimate combo board. This
touch panel controller provides optimal performance of your analog resistive touch
panels for 4 wire models. It communicates with a PC system directly through USB
and RS-232 connectors. The touch panel driver emulates mouse left and right button
functions.
6.2 Specifications
Electrical Features
 +5 Vdc/ 100 mA typical, 50mV peak to peak maximum ripple and noise.
 Bi-directional RS-232 serial communication and USB 1.1 full speed
 Report rate of RS-232 is 180 points/sec (max.). And, USB is 200 points/sec
(max.)
 Unaffected by environmental EMI
 Panel resistance of 4-wire resistive model is from 50 to 200 ohm (Pin to pin on
same layer)
 Touch resistance under 3K ohm
Serial Interface
 EIA 232E (Serial RS-232)
 No parity, 8 data bits, 1 stop bit, 9600 baud (N, 8, 1, 9600)
 Support Windows 2000/ Vista/ XP/ 7, Windows CE 5.0/ 6.0/ 7.0, Windows NT4,
Linux, DOS, QNX
USB Interface
 Conforms to USB Revision 1.1 full speed.
 If the USB is connected to the controller, the controller will communicate over
the USB, and will not communicate over the serial port.
 Support Windows 2000/ Vista/ XP/ 7, Windows CE 5.0/ 6.0/ 7.0, Linux, QNX
Touch Resolution
 2,048 x 2,048 resolution
Response Time
 Max. 20 ms
6.3 Environmental Feature
Reliability
 MTBF is 200,000 hours
Temperature Ranges
 Operating: -25°C ~ 85°C
 Storage: -25°C ~ 85°C