Advantech IDK-1107WP Series, User Manual

Page: 28 / 37

IDK-1107WP User Manual 20
5.1 Touch Characteristics
This touch panel is a resistance type that customers use with flat displays like LCDs.
Once an operator touches it, the circuit sends coordinate points to the PC from the
voltage at contact points.
5.2 Optical Characteristics
5.3 Environmental Characteristics
5.4 Mechanical Characteristics
5.5 Electronic Characteristics
Item Specification Remarks
1 TRANSPARENCY 90% ± 3% measured by BYK-Gardner
2 HAZE <2% measured by BYK-Gardner
Item Specification Remarks
1 Operating temperature
-20
°
C ~ 70
°
C
When the ambient temperature
is above 65oC, the humidity is
allowed to be below 50%RH.
2 Storage temperature
-40
°
C ~ 80
°
C
3 Operating Humidity 20% ~ 85%RH
4 Storage temperature 20% ~ 90%RH
Item Specification Remarks
1 Hardness of surface Pencil hardness 7H. ASTM D3363
Pressure: 750g/45
°
2 FPC peeling strength
800g by vertical 90
°
for 30 sec
3 Operation force Finger ≤ 10g, ≥ 8 ψ Within "guaranteed active area",
but not on the age.
Item Specification Remarks
1 Response < 25ms
2 Accuracy
Line Drawing:
1pt ± 1mm offset /10mm
2pt ± 2mm offset / 10mm
touch point:
1pt ± -2.5mm
2pt ± -5.0mm
Refer to Windows 7 Logo Regulation
3 Multi-Touch
Fingers Pitch Between the Finger Pitch > 10mm Channel Pitch
Should be
5mm~7mm