6 FWA-1330A Startup Manual
Board Placement
1. Read these safety instructions carefully.
2. Keep this user manual for later reference.
3. Disconnect this equipment from AC outlet before cleaning. Do not use liquid or spray detergents for cleaning.
4. For pluggable equipment, the power outlet shall be installed near the equipment and shall be easily accessible.
5. Keep this equipment away from humidity.
6. Put this equipment on a reliable surface during installation. Dropping it or letting it fall could cause damage.
7. Do not leave this equipment in an environment unconditioned where the storage temperature under 0° C (32° F) or
above 40° C (104° F), it may damage the equipment.
8. The openings on the enclosure are for air convection hence protects the equipment from overheating. DO NOT COVER
THE OPENINGS.
9. Make sure the voltage of the power source is correct before connecting the equipment to the power outlet.
10. Place the power cord such a way that people can not step on it. Do not place anything over the power cord. The voltage
and current rating of the cord should be greater than the voltage and current rating marked on the product.
DIMM1
JCOMS1
MINIPCIE1
SATA_PWR2
PWR_BTN1
DC_CN1
VGA1
DC_JACK1
COM2 COM1 USB1_2
LAN1_2
LAN3_4
USB3_4
LPC1
MSATA1
SATA1
PSON1
GPIO1
SYSFAN2
SYSFAN1
SATA_PWR1
BPLED3_4
BPLED1_2
SYS_RST1
SMB_CN1
Safety Instructions
