Advantech FPM-5191G Series, User Manual, Page: 23 / 44

15 Appendix A
4. Linearity
4.1 Linear Test Specifications
Direction X: <1.5 %
Direction Y: <1.5 %
4.2 Linearity Test
Apply voltage (DC5V) to upper (or lower ) electrodes, output
voltage Vx or Vy on the other electrodes is measured at every
regular intervals.
Linearity is the value of max. error voltage
5. Environment Specifications
5.1 Operating Temperature: -10 ~ + 60° C
5.2 Storage Temperature: -40 ~ +80° C
5.3 Humidity: if 40° C, humidity <80% RH
if 40° C, humidity < 90% RH No dew condensation
A.3 Installing Driver for Windows OS
The touchscreen has drivers for Windows 2000/XP/Vista. You should
read the instructions in CD-ROM Disk Touchscreen section carefully
before you attempt installation. The FPM-5191G-XCE, RCE need to
install Penmount 6000 driver. Please find Penmount 6000 folder and
install the driver into your system.
Note 1: The driver manual are examples only. You must fol-
low the flow chart instructions and pay attention to
the instructions which then appear on your screen.
Note 2: The USB & RS-232 cable not allow to connect to
system at the same time.
Note 3: USB & RS-232 interface driver is different, uninstall
previous driver before installing a different driver.
:
Note 4: If there is any others OS driver need, could down-
load at the web site: http://www.penmount.com.tw
(Penmount 6000)