Advantech FPM-40S, User Manual, Page: 20 / 34

14 FPM-40T/S User's Manual
A.1 Introduction
Before you attempt to install the touchscreen driver, you should
carefully read the instructions in the relevant "read me" file stored in
the installation CD-ROM. The file path for the instructions in the
CD-ROM is:
D:\monmouse\
This is where you will find instructions for Win 95, DOS 3.1, Win
NT, and OS/2.
Note 1: The touchscreen driver must be installed from the
CD-ROM supplied. The CD-ROM drive is designated
as "D" throughout this chapter.
Note 2: The installation instructions assume that the
touchscreen is connected to COM1, and that the
mouse is connected to and set for COM2. Both of
these configurations are factory pre-settings.
Note 3: The following illustrations of windows are examples
only. You must follow this manual's flowchart
instructions, and pay attention to the instructions
which then appear on your screen.