ER75s
5.3
Basic dimensions
Figure 3: Basic dimensions
5.4
Mechanical dimensions and mounting recommendations
Router is standardly designed for:
•
mounting to a panel using through holes,
•
possibility to be put on a work surface,
•
mounting onto the DIN rail by the plastic clips, which are included.
For the most of applications with a built-in router in a switch board it is possible to recognize
two kinds of environments:
•
no public and industry environment of low voltage with high interference,
•
public environment of low voltage without high interference.
For both of these environments it is possible to mount router to a switch board, the following
there is no need to have examination immunity or issues in connection with EMC according to
EN 60439-1 ed.2:00 + A1:04 + Opr.1:08 + Z1:10.
7
Summary of Contents for ER75s
