Advantech EPD-023, User Manual

Page: 19 / 50

2.4.2 Registration
Router
Router Power on
System get cache file and set GW
cmd Router connect to gateway
EPD Device
Default setting for shipping: Supports 11 channels.
Power on auto check if a router exists and asks to join the network.
Router permits to join if the EPD device is on the
whitelist EPD device joins the network
2.4.3 Status report
Router (WISE-3610Z or WIS-3240) will report status every 1 mins
EPD device will report status every 1 mins
2.4.4 Execute actions Cmd
Router will receive action commands from the gateway in real-time .
EPD device sends data requests every 20 secs from sleep mode to router to
check if there are any action commands.
EPD device will send back the ACK turn result if the action command is exe-
cuted.
2.4.5 Firmware update
WISE-1840 network control card in the Router will receive FW upgrade com-
mands from the router in real-time and execute automatically. System will
reboot after FW upgrade is complete.
EPD device sends data requests every 20 secs from sleep mode to the router to
check if there is any action command. EPD device receives FW upgrade com-
mands if there is FW upgrade action. After upgrading, the EPD device will re-
register network.
2.5 Whitelist mechanism
Before importing the whitelist, the user need to setup a router channel which can pro-
vide optimal performance. Users can setup the channel from ePaper manager and
the router channels are: 11 13 14 15 20 21 22 23 24 25 26. If the channel has not
been set, the router will be set to the default channel of 15.
(1). When a user receives the goods, it comes with an EPD device whitelist. Users
need to import the list from ePaper manager.
(2).ePaper manager can dispatch the list to the connected system daemon in the
Gateway.
(3) EPD device can auto join the network after the whitelist has been properly setup
in ePaper manager and Gateway.
Note! End users need to be aware which 2.4Ghz wi-fi channels have been
used to avoid to using the same channels.
9 EPD-023 User Manual