EPC-S202 User Manual
10
2.3.4
USB 3.0 Connector
EPC-S202 supports two USB interfaces, which deliver Plug & Play and hot swapping
capabilites for up to 127 external devices. The USB interface complies with USB
UHCI, Rev. 3.0.
Please refer to Table. 2.2 for its pin assignments. USB 3.0 connectors contain legacy
pins to interface to USB 2.0 devices, and a new set of pins for USB 3.0 connectivity
(both sets reside in the same connector).
Figure 2.6 USB Connector
2.3.5
Audio Connector
EPC-S202 supports stereo audio ports by two phone jack connectors: Line-out/Line-
in. The audio chip is controlled by ALC888S and is compliant with Azalea standards.
Figure 2.7 Audio Connector
Table 2.2: USB Connector Pin Definition
Pin
Signal Name
1
+5V
2
D-
3
D+
4
GND
5
SSRX-
6
SSRX+
7
GND
8
SSTX-
9
SSTX+
Table 2.3: Audio Connector Pin Definition
Pin
Signal Name
1
Line-out
2
Line-in
Summary of Contents for EPC-S202
