EPC-R6410 Android User Manual
38
4.6.3
Transfer the whole system to onboard eMMC
1.
Open a debug console
2.
Boot up from the SD card
Perform the following command:
root@PcName:~#
cd /data/mkimage /scripts
root@PcName:~#
./mkmmc?android.sh /dev/block/mmcblk0
3.
Remove the SD card, then EPC-R6410 can boot up from the onboard eMMC.
4.7
Customization
4.7.1
Config Android Kernel
1.
Open a terminal console and change directory to BSP scripts folder
2.
Perform the following command:
root@PcName:~#
cd android/kernel_imx
root@PcName:~#
make ARCH=arm menuconfig
3.
Linux Kernel configuration is shown below:
Summary of Contents for EPC-R6410
Page 1: ...User Manual EPC R6410 NXP ARM Cortex A9 i MX6Dual Quad Computer Box...
Page 10: ...EPC R6410 Android User Manual 4...
Page 26: ...EPC R6410 Android User Manual 20 Figure 2 1 HyperTerminal Settings for Terminal Setup...
Page 38: ...EPC R6410 Android User Manual 32...
